王中王心水冰坛资料精选中文版

<form id="lzsdw"></form>

              6100 Series Flex-Frame Rakes

              • H&S Flex-Frame wheel rakes are available in 16, 18, 20, and 22 wheel models.
              • The raking wheels are positioned ahead of the rake arms, main frame beams and transport wheels. coupled with a high and wide end of frame, there are no hang-up points or restrictions when raking the heaviest of hay crops.
              • The rake beams and rake arms feature flex-joints for maximum flexibility over the terrain.
              • A brake band on each front gauge wheels can be easily adjusted to field conditions.
              • Large independent 60″ rake wheels with “Bee Hive” style spring suspension follow the contours of the ground smoothly.
              • A large diameter rake wheel hub is used for added strength to the rake wheel dish.
              • The adjustment for the ground pressure on the rake wheels allows the operator to fine tune the Flex-Frame wheel rakes to fit varying conditions.
              • The rake arms feature 2 ball bearings on each end of the arm for long life, smooth operation, and less wear than rakes with bushings.
              • The 60″ diameter rake wheels turn slower for less tooth wear and deliver more capacity.
              • Windrow width adjustment is made by a ratchet jack. A Hydraulic Rear Windrow Width Adjustment is Optional.
              • Each rake beams articulates and flexes independently.
              • Raking widths can be hydraulically adjusted in any position up to the pre-determined raking width. Setting the spring loaded stop allows you to set a pre-determined raking width.
              • Rake wheel wind boards are standard on the Flex-Frame Rakes.
              • Optional rear limited oscillating offset tandem transport wheels assure a smooth, level ride, even over irrigation tracks.
              • A center kicker wheel assembly is optional.
              6116
              NUMBER OF WHEELS 16
              WHEEL DIAMETER 60″
              TEETH PER WHEEL 40
              TOOTH DIAMETER 7.5mm
              RAKE WHEEL HUBS Ball Bearings
              RAKE WHEEL ANTI-WRAP SHIELDS Standard
              RAKE WHEEL SUSPENSION Independent “Bee Hive” Spring
              TRANSPORT WIDTH 10′ 6″
              TRANSPORT LENGTH 32′ 7″
              TRANSPORT HEIGHT IN TRANSPORT POSITION 80″ w/SMV Sign
              MAXIMUM RAKING WIDTH 32′
              WINDROW WIDTH ADJUSTMENT 3′ TO 5′
              NUMBER OF RAKING POISTIONS 6
              GROUND PRESSURE RAKE WHEEL ADJUSTMENT Nut/Threaded Rod
              RAKE WHEEL WIND PANELS Standard
              HYDRAULIC REAR WINDOW ADJUSTMENT Optional
              HITCH JACK Standard
              WEIGHT 5750#
              CENTER KICKER WHEEL Optional
              HYDRAULIC REQUIREMENTS 1 Double Acting Cylinder For Folding
              FRONT GAUGE WHEELS 4 – 9.5L X 15
              STANDARD SINGLE REAR TRANSPORT WHELS 2 – 9.5L X 15
              OPTIONAL TANDEM REAR TRANSPORT WHELS 4 – 9.5L X 15
              TRANSPORT LIGHTING Optional
              6118
              NUMBER OF WHEELS 18
              WHEEL DIAMETER 60″
              TEETH PER WHEEL 40
              TOOTH DIAMETER 7.5mm
              RAKE WHEEL HUBS Ball Bearings
              RAKE WHEEL ANTI-WRAP SHIELDS Standard
              RAKE WHEEL SUSPENSION Independent “Bee Hive” Spring
              TRANSPORT WIDTH 11′ 6″
              TRANSPORT LENGTH 34′ 8″
              TRANSPORT HEIGHT IN TRANSPORT POISITION N/A
              MAXIMUM RAKING WIDTH 35′ 6″
              WINDROW WIDTH ADJUSTMENT 3′ TO 5′
              NUMBER OF RAKING POISTIONS 6
              GROUND PRESSURE RAKE WHEEL ADJUSTMENT Nut/Threaded Rod
              RAKE WHEEL WIND PANELS Standard
              HYDRAULIC REAR WINDOW ADJUSTMENT Optional
              HITCH JACK Standard
              WEIGHT 7894#
              CENTER KICKER WHEEL Optional
              HYDRAULIC REQUIREMENTS 1 Double Acting Cylinder For Folding
              FRONT GAUGE WHEELS 4 – 11L X 15
              STANDARD SINGLE REAR TRANSPORT WHELS 2 – 11L X 15
              OPTIONAL TANDEM REAR TRANSPORT WHELS 4 – 11L X 15
              TRANSPORT LIGHTING Optional
              6120
              NUMBER OF WHEELS 20
              WHEEL DIAMETER 60″
              TEETH PER WHEEL 40
              TOOTH DIAMETER 7.5mm
              RAKE WHEEL HUBS Ball Bearings
              RAKE WHEEL ANTI-WRAP SHIELDS Standard
              RAKE WHEEL SUSPENSION Independent “Bee Hive” Spring
              TRANSPORT WIDTH 11′ 6″
              TRANSPORT LENGTH 37′ 6″
              TRANSPORT HEIGHT IN TRANSPORT POISITION N/A
              MAXIMUM RAKING WIDTH 38′ 6″
              WINDROW WIDTH ADJUSTMENT 3′ TO 5′
              NUMBER OF RAKING POISTIONS 6
              GROUND PRESSURE RAKE WHEEL ADJUSTMENT Nut/Threaded Rod
              RAKE WHEEL WIND PANELS Standard
              HYDRAULIC REAR WINDOW ADJUSTMENT Optional
              HITCH JACK Standard
              WEIGHT 8224#
              CENTER KICKER WHEEL Optional
              HYDRAULIC REQUIREMENTS 1 Double Acting Cylinder For Folding
              FRONT GAUGE WHEELS 4 – 11L X 15
              STANDARD SINGLE REAR TRANSPORT WHELS 2 – 11L X 15
              OPTIONAL TANDEM REAR TRANSPORT WHELS 4 – 11L X 15
              TRANSPORT LIGHTING Optional
              6122
              NUMBER OF WHEELS 22
              WHEEL DIAMETER 60″
              TEETH PER WHEEL 40
              TOOTH DIAMETER 7.5mm
              RAKE WHEEL HUBS Ball Bearings
              RAKE WHEEL ANTI-WRAP SHIELDS Standard
              RAKE WHEEL SUSPENSION Independent “Bee Hive” Spring
              TRANSPORT WIDTH 11′ 6″
              TRANSPORT LENGTH 40′ 6″
              TRANSPORT HEIGHT IN TRANSPORT POISITION N/A
              MAXIMUM RAKING WIDTH 41′ 6″
              WINDROW WIDTH ADJUSTMENT 3′ TO 5′
              NUMBER OF RAKING POISTIONS 6
              GROUND PRESSURE RAKE WHEEL ADJUSTMENT Nut/Threaded Rod
              RAKE WHEEL WIND PANELS Standard
              HYDRAULIC REAR WINDOW ADJUSTMENT Optional
              HITCH JACK Standard
              WEIGHT 8521#
              CENTER KICKER WHEEL Optional
              HYDRAULIC REQUIREMENTS 1 Double Acting Cylinder For Folding
              FRONT GAUGE WHEELS 4 – 11L X 15
              STANDARD SINGLE REAR TRANSPORT WHELS 2 – 11L X 15
              OPTIONAL TANDEM REAR TRANSPORT WHELS 4 – 11L X 15
              TRANSPORT LIGHTING Optional

              WARRANTY: SEE OERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

              Optional 3-Wheel Center Kicker Assembly

              Optional Rear Tandem Walking Beams

              Optional Hydraulic Rear Windrow Adjustment.

              Optional 2-Point Hitch.

              Optional Hitch Extension.

              Transport & Work Lights
              (NO PICTURE AVAILABLE)

              There was clearly a definite simply click within the keyless functions whenever environment time, and patek philippe replica the date quickset was very irratic, the two typical troubles in order to Seiko 62xx calibres while don begins to placed in.
              王中王心水冰坛资料精选中文版